Most drawer slides fall into four families: ball-bearing side-mount, roller (epoxy) side-mount, undermount and center-mount. Ball-bearing slides glide smoothest and carry the most. Roller slides are simple and inexpensive. Undermount slides hide beneath the drawer for a clean look. Center-mount slides are the old, light-duty option for small drawers. For a bedroom chest, a kids’ room or a home office, the right choice comes down to how heavy the contents are, how far you need the drawer to open and how long you want it to last.
We have been making furniture in South Africa for over 30 years, and drawers are where people feel quality every single day. This guide explains each slide type in plain words, so you know what you are looking at when you open a drawer in a showroom or on a product page.
TL;DR
- Ball-bearing slides use steel balls between metal rails: smooth, full extension and the best for heavy loads, but they cost more and need careful fitting.
- Roller (epoxy) slides use plastic or nylon wheels in a track: inexpensive and easy to install, usually opening about three-quarters of the way.
- Undermount slides sit under the drawer and are hidden, so the look is clean, and they are normally full extension.
- Side-mount vs undermount is mostly a trade: side-mount needs a gap at each side, undermount needs space below and a drawer box built for it.
- Match the slide to the load: clothes need little, tools, files and kids’ toys need more.
Table of Contents
- What a drawer slide actually does
- The main drawer slide types
- Side-mount vs undermount: the practical differences
- Ball-bearing vs roller slides: smoothness, strength, cost
- Which slide for which room
- How to choose drawer slides, step by step
- Why the slide matters when you buy furniture
- Our view on drawers
- Find drawers that suit your space
- FAQ
- Sources
What a drawer slide actually does
A drawer slide is the metal runner pair that lets a drawer move in and out of its cabinet. Two slides are used per drawer, one on each side (or one underneath, or one in the middle, depending on type). Without them, a drawer drags on wood, wears the edges and jams as soon as it carries real weight.
Three terms come up on every product description:
- Extension is how far the drawer opens. Sugatsune explains that a three-quarter-extension drawer does not open fully, while full extension exposes the whole drawer length so you can reach the back.
- Over-travel is when the slide runs about an inch past the cabinet front, as Woodworking Network defines it.
- Load rating is the weight the slide is rated to carry, and it only means something with its test conditions attached (more on that below).
“Telescopic” is simply another word for slides made of sections that slide within each other, so the drawer can extend beyond the length of any single piece. Ball-bearing and most roller slides are telescopic.
The main drawer slide types
Ball-bearing side-mount slides
This is the most common type in better furniture. Sugatsune describes the design as an outer, middle and inner member with steel balls held between the rails, which spread the load and keep movement smooth. One slide is fixed on each side of the drawer.
What you get: full extension, long lengths and heavy-load options. The trade-off, according to Fine Woodworking’s 2024 guide, is that they cost more than roller slides and are trickier to install. They are the natural fit for deep drawers, filing drawers, workshop storage and anything that gets opened dozens of times a day.
Roller (epoxy or Euro) slides
Roller slides run on nylon wheels inside a track, as Woodworking Network notes. The same Fine Woodworking guide describes basic bottom-mount epoxy slides as inexpensive and easy to install, with three-quarter extension.
What you get: a lighter, quieter, simple mechanism that suits clothing drawers, bedside tables and children’s furniture where the contents are soft and light. You may not reach the very back of the drawer, which matters little when the drawer holds T-shirts.
Undermount slides
These are fitted beneath the drawer and are concealed when the drawer is opened. Fine Woodworking describes them as full extension, usually with soft-close included, and with only a small gap at the sides.
The catch is in the construction: undermount drawer boxes have model-specific requirements for side thickness and dimensions, and may need notches at the back. They also need clearance below the drawer and slightly reduce its inside height. That is why you see them mostly on kitchen and premium cabinetry where the drawer box is built to suit.

Center-mount slides
A single slide runs down the middle underneath the drawer. They are one of the oldest designs and the lightest-duty. You will meet them in older desks and small drawers. With one runner doing all the work, they are not the choice for wide or heavy drawers.
Heavy-duty and soft-close variants
Two other labels appear on spec sheets, and they are features rather than separate families. Heavy-duty usually means a ball-bearing slide with a high rated load. Soft-close adds a damper that catches the drawer in the last few centimetres and pulls it shut gently, which is welcome in a child’s bedroom where slamming is a daily event.
Side-mount vs undermount: the practical differences
| Side-mount | Undermount | |
|---|---|---|
| Visibility | Visible at the drawer sides | Hidden under the drawer |
| Side clearance | Typically about 1/2 inch (12.7 mm) per side | Much smaller gap |
| Space below the drawer | Not needed | Needed, and drawer is a little shallower inside |
| Extension | Several types: three-quarter, full | Typically full extension |
| Drawer box | Almost any box will do | Built to the slide’s specification |
| Installation | Straightforward to moderate | Needs compatible construction |
The side clearance figure comes from Woodworking Network. The sensible rule: side-mount is the flexible, forgiving choice that works in nearly every drawer design, and undermount is a styling and access upgrade when the drawer is made for it.
Ball-bearing vs roller slides: smoothness, strength, cost
The comparison most people really want:
- Smoothness: ball bearings glide with a steadier, quieter feel under load. Rollers are smooth when new and light, but a heavy drawer exposes them sooner.
- Strength: ball-bearing slides come in long-length and heavy-load versions. Rollers are meant for lighter contents.
- Reach: ball bearing normally means full extension. Roller means roughly three-quarters.
- Cost: Fine Woodworking puts roller slides at the inexpensive end and ball-bearing at the higher end.
- Fitting: rollers are simple. Ball-bearing pairs need to be parallel and square.
How to read a load rating
A number on a box, say 45 kg, is only useful when you know how it was tested. Take the technical sheet for one heavy-duty full-extension slide from Accuride as an example. It lists maximum ratings of 124 kg for moderate use and 91 kg for frequent use. The moderate rating is based on a pair of slides on a 16-inch-wide drawer cycled 10,000 times. The frequent-use rating is based on a pair of 18-inch slides on a 42-inch-wide drawer cycled 75,000 times.
The same slide series, then, has different safe loads depending on how often and how widely it is used. For everyday shopping, the takeaway is simple: a rating is a ceiling under test conditions, not a target. Load a drawer comfortably below it.

Which slide for which room
Bedroom chests and wardrobe drawers
Clothes are light but heavy in bulk: a full drawer of folded jeans and jerseys adds up. Roller slides handle this well in a sensibly sized drawer. Full extension is a bonus for deep drawers, since you can see the bottom layer without lifting everything out. Our guide to choosing the right drawer unit for South African bedrooms walks through how many drawers and what depth suit different households, and you can browse our chests of drawers and bedroom furniture ranges.
Kids’ furniture
Children open and close drawers with their whole body, often with force. They also stack toys, books and craft supplies. What matters most here is durable hardware that resists daily knocks, a smooth action a small hand can manage, and, if available, a soft-close feature that protects little fingers from sudden slams. Measure the drawer against the child’s reach: a drawer that is too deep and too heavy to pull is a drawer that gets abandoned.
Home office and study desks
Paper is surprisingly heavy. A drawer full of files or stationery asks more of a slide than a drawer of socks. For pedestals and desk drawers that open many times a day, ball-bearing full extension is the better match, because you can reach to the back of the drawer without leaning awkwardly. Businesses fitting out several workstations should treat the slide as part of the specification, just like desktop size.
Living room and TV units
Media drawers carry remotes, consoles, cables and board games: moderate weight, opened occasionally. Either roller or ball-bearing works. Choose on how deep the drawer is and how often you will use it.
How to choose drawer slides, step by step
Whether you are comparing furniture or planning a repair, work through the same five questions. They follow the selection logic Woodworking Network lays out.
- Decide what goes in the drawer. Light clothing, mixed household items or heavy files and tools. This sets the load you need.
- Match the length to the cabinet. The slide has to fit the depth of the cabinet, allowing for anything in the way, like a back panel or a frame.
- Choose the extension. Three-quarter is fine for light, shallow drawers. Choose full extension when you need to reach the back of a deep drawer.
- Check the mounting style. Side-mount for flexibility, undermount for a hidden look, but only where the drawer box is made for it.
- Check the build. Look for sturdy fixings and rust-resistant hardware, particularly in humid coastal areas such as KwaZulu-Natal and the Western Cape.
If you are fitting slides yourself
For drawers you assemble or repair, a few tips from the installation guidance:
- Keep the cabinet-side members parallel. The Accuride sheet says to mount the drawer members with the screws initially left loose so you can adjust before tightening.
- Fine Woodworking recommends using the elongated holes for initial positioning and adding screws through the round holes to lock the slides, with pre-drilling and screws that suit the slide.
- The same guide notes that frameless cabinets take slides directly on the cabinet sides, whereas face-frame cabinets commonly need blocking or spacers behind the slides.
A drawer that sticks or drags is usually a parallel or spacing problem, not a faulty slide. Loosen, realign, and retighten.
Why the slide matters when you buy furniture
In flat-pack furniture, the slide is part of a system: the drawer box, the cabinet sides, the screws and the assembly instructions all have to agree. A good slide in a poorly specified box still sticks. That is why we think about drawers as a whole.
At Me&Co, our furniture is locally manufactured with A-grade materials and anti-rust hardware, and it comes with easy assembly instructions that take the guesswork out of putting a unit together. If you are weighing flat-pack against ready-built, our comparison of flat pack or pre-assembled furniture lays out the trade-offs, and the guide to flat-pack furniture in South Africa shows what to look for.
Size matters as much as hardware. Before you order, measure the space and the drawers you need using our chest of drawers dimensions guide, so that the slide length and the drawer depth suit the room.
Our view on drawers
We have spent more than 30 years building furniture for South African homes, and we have learned that people rarely remember a chest of drawers for its colour. They remember how the drawer feels on a Monday morning when they are late.
That is why we pay attention to the parts you cannot see in a photograph. Our ranges are made locally with A-grade materials and anti-rust hardware, because South African homes, from humid Durban to dry Gauteng, ask a lot of a drawer over the years. We pair that with clear assembly instructions, so the fitting goes the way it should.
Our advice is simple. Think about what the drawer will hold, how often it will be opened and who will be opening it. A parent choosing for a child’s room, a homeowner furnishing a main bedroom and a business setting up a row of desks are asking different questions, and the right drawer answers each one.
Think of us as your great housemate: we want your home to work, quietly, every day.
Hishaam
Find drawers that suit your space
Whether you need a bedroom chest, a study desk or office pedestals, our locally made ranges are built for everyday use. Browse our Office and Study collection, or look at pedestals such as the Carried 1-Drawer Pedestal and the Alto 2-Drawer Pedestal. Orders over R5,000 qualify for free nationwide delivery, and our furniture carries a six-month warranty.
For wardrobes with drawers inside, see our wardrobes range, and our wardrobe door alignment guide keeps things running smoothly after assembly.
FAQ
What is the most common type of drawer slide?
The side-mount ball-bearing slide is the most common in good-quality furniture. It fits on each side of the drawer, offers full extension and handles a wide range of loads. Roller slides are common in lighter, budget-friendly pieces.
What are full-extension drawer slides?
Full-extension slides let the drawer open the whole length of the slide, so you can reach everything inside. Three-quarter extension opens roughly 75% of the slide length. Full extension suits deep drawers and anything you need to see from above.
Are undermount slides better than side-mount slides?
They look cleaner because they are hidden, and they are typically full extension. They also need a drawer box made to the slide’s specification and space beneath the drawer. Side-mount slides work in almost any drawer, which makes them the flexible choice.
How do I know what drawer slides to use?
Start with the load, then the cabinet depth, the extension you want and the mounting style. For light clothing, roller slides are enough. For files, tools or heavy daily use, choose ball-bearing full extension and keep the load below the rated figure.
Does a higher load rating mean a stronger drawer?
Only if you compare ratings tested the same way. The Accuride sheet shows one slide series with different limits for moderate and frequent use. Treat the rating as a ceiling and leave a comfortable margin.
Sources
- How to choose the right drawer slide | Woodworking Network
- Mechanical Drawer Slides | Fine Woodworking
- Drawer Slides | Sugatsune hardware basics
- 3607/3657 Heavy Duty Slide with Full Extension, installation and technical sheet
- A Guide to Drawer Slides | Fine Woodworking
