Flat pack furniture assembly goes well when you do four things: unpack and sort everything first, build in the order the instructions give, keep every screw loose until the frame is square, and fix tall pieces to the wall at the end. Most people can build a wardrobe, desk or TV unit on their own in an afternoon with a screwdriver and a bit of floor space. Below is how we would do it, from the box in your hallway to a piece that stands firm for years.
TL;DR
- Clear a space about twice the size of the finished piece, open the boxes, and check every part against the parts list before you build anything.
- Build in the order of the instructions, and leave screws a little loose until the whole frame is together and square.
- Tap dowels in gently and last, and never force a panel that does not want to fit.
- Anchor wardrobes, chests of drawers, bookshelves and TV units to the wall, especially in a home with kids.
- Missing a part or stuck on a step? Stop, photograph it, and contact the maker before you improvise.
Table of Contents
- Before You Open the Box
- The Tools You Actually Need
- Step by Step: How to Assemble Flat Pack Furniture
- Tips That Prevent the Common Mistakes
- Fixing Common Problems
- Making It Stable and Safe, Especially for Kids
- Our Perspective: Why We Design for the Person on the Floor
- Room by Room: What to Expect
- Furniture That Is Built to Go Together
- Build It Yourself or Hire Someone?
- FAQ
- Sources
Before You Open the Box
Good assembly is about 30% preparation. A few minutes here saves you from the classic mistake: a half-built wardrobe on the lounge floor and a missing cam lock.
Pick the room you will build in. If you can, assemble the piece in the room where it will live. A fully built wardrobe often will not fit back through a bedroom door, and carrying a finished unit around corners is how corners get chipped. Measure the doorway and the ceiling height too. Tall units are usually built lying down and then stood up, so you need more headroom than the final height.
Clear a space. Aim for roughly double the footprint of the finished item. You need room to lay out panels and to open doors while you work.
Protect the floor and the panels. Lay the flattened boxes or a blanket on the floor. Laminated and melamine-faced boards scratch easily, and a soft surface also stops panels sliding while you drive screws.
Check the delivery before you unpack it. Look at the boxes for crushing or water damage. If anything looks wrong, photograph it before you open it. This makes any follow-up with the seller quick and simple.
Know your wall. If the piece is going to be fixed to a wall, find out what the wall is made of: brick, concrete, or a hollow partition. The wall type decides which fixings you need, and the ones in the box are not always right for your wall. We cover this further down.
Set aside the time. A small bedside pedestal can take under an hour. A three-door wardrobe or a large desk is a good afternoon. Two people make big panels much easier and safer to handle, so line up a helper for the lifting steps.

The Tools You Actually Need
The good news: most flat pack ranges, including ours, are designed so that a basic toolkit does the job. Hardware is packed in the box, and the instructions show which tool each step needs.
| Tool | What it is for |
|---|---|
| Phillips screwdriver (and a flathead) | Most screws, cam bolts and hinge adjustments |
| Allen key | Included in many hardware packs for bolts |
| Rubber mallet or a hammer with a cloth | Tapping in dowels without marking the surface |
| Tape measure | Checking placement and spacing |
| Spirit level | Checking that the unit is level and square |
| Cordless drill or screwdriver (optional) | Speeds up long builds and wall fixings |
| Pencil | Marking wall fixing points |
Two notes on power tools. First, a small cordless screwdriver on a low torque setting saves your wrist on a wardrobe, but a full-power drill can strip the chipboard around a screw hole in seconds. If you use one, set the clutch low and finish the last turn by hand. Second, a drill is only really needed for the wall fixing, so do not buy one just for assembly.
A small tray or a few bowls help more than most tools. Tip the hardware into them, sorted by type, so you are not hunting for the right screw on the carpet.
Step by Step: How to Assemble Flat Pack Furniture
Every design differs, so the printed instructions always come first. These steps are the habits that apply to almost every piece.
1. Unpack and lay everything out
Open the boxes carefully. Do not use a blade deep into the carton, because it can slice the edge of a panel. Lay panels flat and group them: sides, tops, shelves, backs, doors, drawers.
2. Count and check
Go through the parts list in the instructions. Match every panel by its label or size, and count every bag of hardware. Do this before building, not halfway through. If something is missing or damaged, you want to find out while the whole piece is still in the box.
3. Read the whole set of instructions once
Skim from the first page to the last. You will see which panels go in first, and which steps are hard to reverse once glued or pushed together. It takes five minutes and it removes most of the surprises.
4. Build the frame loosely
Follow the order shown. Start the screws and cam bolts, but keep them slightly loose so the panels can shift. Most alignment problems come from tightening one corner fully before the rest of the frame is together.
5. Check square and level as you go
Place a spirit level on top of the frame and measure the diagonals corner to corner. If the two diagonals match, your box is square. If they do not, nudge the frame until they do, and only then tighten everything.
6. Dowels and cam locks
Tap dowels in gently, ideally into the panel edge first, rather than forcing a panel onto them. Check the holes are clear before pushing pieces together. Cam locks should be turned until they click or reach their stop. Do not keep cranking past that point.

7. Add the back panel last, and check it is square
The thin back panel is what keeps the cabinet from racking sideways. Fit it carefully, with the small nails or screws spaced as shown. A back panel that is slightly out of square will make doors hang crooked.
8. Fit doors and drawers
Hang doors only once the frame is firm. Hinges usually have adjustment screws that move the door up, down, in and out. A quarter turn at a time is enough.
9. Move it into place and fix it to the wall
Slide the piece into position, check it is level, and fit the wall fixings if it is a tall or top-heavy unit.
Tips That Prevent the Common Mistakes
- Match orientation twice. Panels often look symmetrical but have holes on one side only. Check the drilled face and the printed finish before you press anything together.
- Do not mix up screws. Similar screws can differ by a few millimeters. A too-long screw can push through the face of a panel, which cannot be undone.
- Keep the instructions in sight. Prop the sheet against a wall so you can follow it without squinting at a floor-level diagram.
- Do not use oil or wax on cam locks. Slippery fittings pull out of position more easily.
- Work with the panel flat. Pushing a panel in while it stands on its edge is how corners get chipped.
- Tighten everything at the end. After the piece is in its final spot, do a last pass over every screw. Furniture moves a little while it is built and carried.
- Take photos at each stage. If you ever have to take the piece apart for a move, you will have a record of how it went together.
Fixing Common Problems
The panels will not line up
Loosen the nearest screws and cam bolts, wiggle the frame until the holes meet, then tighten. If a dowel will not enter its hole, check that the hole is clean and the panel is the right way round. Do not hammer harder.
A screw spins and will not tighten
The chipboard around the hole is stripped. Move to the next hole if the design allows. Otherwise, a wooden toothpick or matchstick with a dab of wood glue pushed into the hole, trimmed flush and left to dry, gives the thread something to grip. Use this for a light-duty fix only, not for a load-bearing joint.
The doors hang crooked or rub
This is nearly always a frame that is not square or a floor that is not level. Check the floor first. Then adjust the hinge screws a quarter turn at a time. Shims under a foot can level a unit on an uneven tile or floorboard.
A drawer sticks
Check that the runners are parallel and that the drawer front is not pressing on the frame. Loosen the runner screws, slide the drawer in to center it, and tighten again.
A panel is scratched or chipped
Take a photo straight away. For tiny marks, a furniture touch-up marker in a matching color works. For anything larger, contact the seller. This is also why we recommend inspecting parts before you start building.
Something is missing or the instructions are unclear
Stop building. Photograph the parts list and what you have, then contact the maker with your order number. Do not swap in hardware from a different kit, since screw lengths and thread differ. When we make a piece, we want to hear about a gap in the box or a confusing diagram, so that we can fix it for the next customer.
Making It Stable and Safe, Especially for Kids
A finished piece can feel solid and still tip if a child climbs the drawers or pulls on an open door. Tall units are the ones to watch: wardrobes, chests of drawers, bookcases and TV stands.
The US Consumer Product Safety Commission runs a national campaign on this exact danger. It advises that furniture and TV tip-overs injure and kill children, that top-heavy furniture should be anchored with anti-tip brackets, and that a TV should sit on furniture built to hold one. It also suggests removing items like toys from the top of units that might tempt kids to climb. The advice is from the United States, but the physics is the same in a South African bedroom.
What that means in practice:
- Anchor the tall pieces. Use the anti-tip hardware provided, or buy brackets for any piece that is taller than it is wide.
- Use the right fixing for your wall. Brick and concrete take a plug and screw. Hollow partition walls do not hold weight on small plastic anchors, so find a stud or use a fixing designed for that wall. Our guide on how to anchor furniture to wall studs, not plastic drywall anchors walks through the choice.
- Load the heavy items low. Put heavy things in the bottom drawers and light things up high.
- Do not let kids climb. Open drawers act like a ladder. Keep the drawers closed and keep the climbing items off the top.
- Check again after a few weeks. Screws settle. Give every fixing a quick tightening once the piece has been in use.
If you are putting a flat-screen on a unit, keep it within the unit’s stated limits and fix it according to the TV maker’s instructions. For ideas on layouts that suit a wall-hung set-up, see our wall-mounted TV unit ideas for South African homes.
Our Perspective: Why We Design for the Person on the Floor
We have been making furniture in South Africa for over 30 years, and the part of the job we think about most is the moment when a customer is kneeling on the carpet with a pile of panels. That is where our product either earns trust or loses it.
So we build with that person in mind. Our ranges are made locally, from A-grade materials, and every piece ships with anti-rust hardware, because screws that stain or seize are the quickest way to spoil a good build. We write assembly instructions to be followed by someone who has never held an Allen key, and we want them to feel capable by step three.
We also believe flat pack is the honest way to deliver furniture to a country as big as ours. Flat boxes travel safely, fit in a bakkie or a lift, and keep costs down, which is why we can offer affordable design without cutting corners. If you are curious about how that works behind the scenes, read how flatpack furniture is made in South Africa, or weigh up the trade-offs in our piece on flat pack versus pre-assembled furniture.
Think of us as your great housemate: we leave the instructions where you can find them, and we are only a message away if a step does not make sense.
— Hishaam
Room by Room: What to Expect
Different pieces ask different things of you. Here is a rough guide.
Wardrobes. The biggest build, and the one that most needs a second pair of hands when the frame goes upright. Build it in the room, fix it to the wall, and fit the doors last. Our flatpack wardrobe buying tips go through what to look at before you order.
Bedroom sets. Headboards, pedestals and chests of drawers are smaller jobs, but drawers need patience and care with runners. If you are furnishing a whole room, see our smart flatpack bedroom ideas.
TV units. Check the weight limit, run your cables before closing the back panel, and anchor the unit. Floating units need a solid wall and the right fixings.
Desks and study furniture. These are often the quickest builds, but level matters: a wobbly desk is irritating every single day.
Kids’ furniture. Take extra care with fixings and always do the final tightening pass. Round off the build by anchoring anything tall.
Furniture That Is Built to Go Together
We make our furniture to be assembled by you, so every detail, from the hole spacing to the hardware, is designed to go together without fuss. Browse our bedroom furniture, wardrobes, TV units or office and study range, or see everything in our full furniture collection.
Orders over R5,000 qualify for free nationwide delivery, and every piece carries our six-month warranty.

If you are ordering a wardrobe online for the first time, our delivery tips for ordering wardrobes online cover what to check on arrival and how to plan the setup.
Build It Yourself or Hire Someone?
Most people do not need help. If you are comfortable with a screwdriver and have a free afternoon, you will save money and get to know your furniture. A few situations favor hiring a local handyman:
- You have several large pieces to build in one day.
- You have a physical limitation that makes lifting or kneeling difficult.
- The piece must be fixed to a tricky wall, such as old plaster or a boundary wall.
- You are furnishing a rental or an office and have a tight deadline.
Whoever builds it, give them the instructions, point out where the piece is going, and ask them to anchor tall items. Fees vary with the item and the area, so agree on the price before the work starts.
FAQ
How long does flat pack furniture take to assemble?
A small piece such as a pedestal or a side table is usually under an hour. A wardrobe, a large desk or a chest of drawers takes a few hours, and the time is mostly in the sorting and checking. Rushing is the usual cause of a rebuild, so allow more time than you think you need.
Can one person assemble flat pack furniture alone?
For most small and medium pieces, yes. For wardrobes and other tall units, get a second person for the moments when the frame is stood upright and for fitting the back panel. It makes the job safer and protects the panels.
What should I do if screws or parts are missing?
Stop and do not substitute hardware from elsewhere. Photograph the parts list and the contents, then contact the seller with your order number. A quick message usually sorts it out far faster than improvising a fix.
Do I need to fix flat pack furniture to the wall?
Yes for anything tall or top-heavy, and especially where children live. Anti-tip brackets are inexpensive and safety guidance recommends installing them right away. Pick the fixing that suits your wall type.
Can I take flat pack furniture apart and rebuild it when I move?
Usually you can, if you take it apart carefully and keep the hardware. Photograph each stage as you go and bag the screws by step. Cam locks and dowels can loosen over repeated builds, so go gently the second time. Our comparison of flatpack and second-hand furniture for renters looks at this from a moving-house angle.